If you want a reliable Beretta 1301 reflex mount that also adds onboard ammo, the Mesa Tactical SureShell Carrier and Reflex Mount for the Beretta 1301 Tactical and A300 is a strong option. Instead of stacking a separate optic plate and shell carrier, this system combines both into one rigid unit. As a result, you gain speed, capacity, and durability without unnecessary bulk.
I have run this setup extensively on my Beretta 1301 Tactical. Over time, it became my preferred configuration. The red dot increases speed dramatically, yet the iron sights remain usable. At the same time, the extra rounds add practical value without changing the shotgun’s balance.
Why Choose This 1301 Reflex Mount Over a Standard Optic Plate?
Many Beretta 1301 optic mounts simply provide a mounting surface for a micro red dot. However, they do nothing to increase capacity. The SureShell design solves two problems at once.
Because the shell carrier and optic mount share the same structure, the setup avoids stacking weight on top of weight. Consequently, the shotgun remains streamlined while still gaining six additional shells. For defensive use, competition, or training, that extra capacity matters.
Beretta 1301 Reflex Mount Installation
Installing this 1301 reflex mount is straightforward. You do not need a gunsmith. In fact, I completed the install with common hand tools in just a few minutes.
First, make sure the shotgun is unloaded and safe. Then remove the factory top rail from the Beretta 1301 Tactical. Next, align the SureShell mount with the factory-drilled holes in the receiver. Finally, secure it using the supplied screws.
The mount locks down firmly without forcing anything into place. Once tightened, it feels solid and well integrated.
Mounting my Trijicon RMR was equally simple. A few minutes with a laser bore sighter made it range-ready. After that, I confirmed zero with live fire and made minor adjustments.
Overall, installation is clean and requires no permanent modification. In short, the mount fits precisely and holds securely once installed.
Mesa Tactical 1301 Optic Mount Design and Durability
This Beretta 1301 optic mount creates a rigid platform for a micro red dot. It’s fully secured against recoil. And it stays tight against the receiver even during repeated heavier loads.
The machining is clean, and the finish matches the shotgun well. More importantly, the unit feels purpose-built rather than aftermarket. In other words, it looks and performs like a factory solution.
Beretta 1301 Optic Mount Performance at Distance
The biggest benefit of adding a red dot is speed. The dot allows faster transitions between targets, especially at mixed distances. For example, I can swing my Beretta 1301 Tactical from close steel to distant targets without searching for the front sight.
Because the dot remains centered in the window, the sight picture stays consistent. As a result, target engagement feels controlled and predictable. Even when transitioning between widely spaced targets, the rhythm stays the same.
Despite the added mount and carrier, handling remains balanced. The additional weight is negligible in practical use. Recoil control also stays consistent.
1301 Reflex Mount Holds Zero Under Heavy Use
I have run plenty of heavier rounds through this setup. Even so, the optic continues to hold zero. The mount does not shift or loosen.
That consistency builds long-term confidence. When a defensive or competition shotgun keeps its zero after repeated recoil cycles, you stop thinking about the mount and focus on shooting.
Maintains Use of Factory Iron Sights
One of the most important features of this Beretta 1301 reflex mount is that it preserves the factory iron sights. If the optic fails, the irons remain immediately usable. Therefore, the system keeps mechanical backup without additional parts or adapters.
Integrated Six-Shell Carrier Design
The built-in SureShell carrier holds six extra rounds directly on the receiver. Because it shares the same structure as the optic mount, the setup avoids unnecessary width or bulk.
Mesa Tactical uses a rubber friction system that secures shells firmly while still allowing smooth removal. Not only is the tubing replaceable, but Mesa Tactical will send replacements upon request.
My stock already holds five rounds. Consequently, adding six more at the receiver significantly increases available reload capacity without resorting to bulky external solutions.
Final Thoughts on the Mesa Tactical SureShell 1301 Reflex Mount
Overall, this Beretta 1301 reflex mount improves speed, versatility, and onboard capacity in one clean solution. The red dot enhances target acquisition at varying distances. Meanwhile, the iron sights remain available as backup. In addition, the integrated carrier adds meaningful capacity without compromising handling.
If you want a durable Beretta 1301 optic mount that installs easily and holds zero under recoil, the Mesa Tactical SureShell system delivers.
You can find it directly at MesaTactical.com or through major retailers such as MidwayUSA.
As always, I’d like to thank Mesa Tactical for providing this mount for testing and evaluation.