Pistol compensators have been showing up a lot more on carry pistols as well as competition pistols. One of the problems with either is that they aren’t always holster-friendly. And with the trend towards smaller and smaller carry pistols, size really does matter. Strike Industries responded to these concerns with their new QUAD and CIRCLE compensators, both of which work well with even the slide profiles of some of the smallest pistols, yet aren’t out of place on full-size ones either. Sort of the best of both worlds, if you want a functional compensator without giving concealability. Here are the details for both.
QUAD Compensator Features:
The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2″x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system. With the clamp style design on the SMTC QUAD, timing the comp is simple including a secure and tight fitment. Originally designed for smaller compact, sub-compact and micro-sized pistols, the SI styling of this QUAD pairs aesthetically well with most OEM and aftermarket slides on the market including full-size pistols. Made from S45C steel with HRC40-45 heat treatment and a black oxide finish, the Strike Micro Threaded Comp -QUAD offers a smaller threaded barrel compensator option for your pistol with SI style.
New Strike industries Micro Threaded QUAD compensator.QUAD Compensator Package Contents:
-x1 Strike Micro Threaded Comp -QUAD
-x1 Set screw [M4x12mm]
-x1 Torx tool [T20]
-x1 WaRning card
QUAD Compensator COMPATIBILITY:
Any 1/2”x28 TPI threaded barrel in calibers 9mm and .357 SIG
NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systems
WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator
Torque: Set screw to exactly 40 in/lbs (4.5 Nm)
NOTE: Recommended to re-apply Loctite® Threadlocker Blue 243® anytime the set screw is removed before reinstalling
DISCLAIMER: Always check with your state and local laws. We are not lawyers.
CIRCLE Compensator Features:
The CIRCLE edition pistol compensator from the Strike Micro Threaded Comp (SMTC) line can work with just about any size slide using a threaded barrel with 1/2″x28 Threads Per Inch (TPI). This simple and sleek CIRCLE design is for those looking for a minimalist-sized compensator that still redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 8-15% in felt recoil. The included O-ring (with spares) is used to help time and retain the SMTC CIRCLE comp. Originally designed for smaller compact, sub-compact and micro-sized pistols, the SI styling of the CIRCLE maintains fitment with your existing holster or the majority of holsters on the market. On full-size or any size pistols, consider it as also a thread protector with added muzzle control. Made from AISI 1144 steel bead blasted with Quench Polish Quench (QPQ) process finish, the Strike Micro Threaded Comp – CIRCLE is small and lightweight at only a total length of 16.3mm (0.64”) while redirecting gas for recoil reduction to keep you on target.
New Strike industries Micro Threaded CIRCLE compensator.CIRCLE Compensator Package Contents:
-x1 Strike Micro Threaded Comp -CIRCLE
-x3 O-ring
WARNING: For threaded barrels with no shoulder, the o-ring included with this compensator will not work and cannot be used to help with timing. Please use Loctite® Threadlocker Red to secure the compensator to the threaded barrel but apply an appropriate amount and not too much. Check this compensator as part of your routine maintenance. All installations must be done by a certified professional gunsmith only and properly tested to pass all safety and function tests.
COMPATIBILITY:
Any 1/2”x28 TPI threaded barrel in calibers 9mm and .357 SIG
WARNING: Due to the reduction of slide energy, recoil spring tuning might be required when using this compensator
DISCLAIMER: Always check with your state and local laws. We are not lawyers.