-
Midwest Industries Chassis, Part Two
Back in September, I shared my Midwest Industries chassis project. As a 10/22-based Charger build, it was a fun project. I even went through…
-
Ruger 22 Charger – Small Size, Big Fun
Despite ammo availability issues, the Ruger 22 Charger isn’t gathering any dust on dealer’s shelves. And for good reasons too. This pistol, based on…
-
Volquartsen Bolt Tune-Up Kit for Ruger Mark Pistols
My quest to continue improving my trio of Ruger Mark pistols lead me to the Volquartsen Bolt Tune-Up Kit. This $38 kit contains a…
-
PMACA Manufacturing
The first Ruger 10/22 chassis I bought came from PMACA. Since then, I’ve added a few more from them as well as other manufacturers.…
-
Performance Upgrades for the Ruger 10/22
This is part two of my upgrades for the Ruger 10/22 series. A little while ago, I wrote this article, on common 10/22 upgrades.…
-
Charger Folding Brace Installation Instructions
Matt from S&P Outfitters recently reached out to me about their Charger folding brace kit. It’s popular, but there were no instructions to make…
-
Ruger Security 9 Review: Budget Glock Alternative?
Both the Ruger PC Carbine and PC Charger are compatible with Ruger Security-9 magazines. Since I have both of the PC variants, I figured…
-
Common Ruger 10/22 Upgrades
Seems as though every new 10/22 owner has the same question at some point: “What are the best 10/22 upgrades?” Well, my best and…
-
Summit Precision Carbon Fiber Barrels
In my quest to build the ultimate 22 Charger, I got my hands on a Summit Precision carbon fiber barrel. Normally available as an…
-
Barrelthreading.com Collaboration
A while back, I did a Charger project in a Midwest Industries chassis. It wasn’t quite AR-themed, but had a bit of that vibe,…
-
Ruger PC Charger. Is the Sequel Better than the Original?
Ruger’s PC Carbine has been very popular, so they followed it up with a PC Charger. Is it better than the original? That’s a…
-
Ruger PC Carbine upgrades from TandemKross
Last month, I upgraded my PC Carbine with the Upriser chassis from TandemKross. I also received their “Internal combo”, along with a few other…
-
Ruger Precision Rimfire
Ruger’s Precision Rimfire rifle sits in a nice spot in their product line. With the success of the Ruger Precision centerfire rifles, they realized…
-
Deadshot Arms Match Grade Bolts for the 10/22
Building a custom Ruger 10/22 has never been easier (or more fun). Now, Deadshot Arms lets you take it another step further. They offer…
-
Interview with Sebastian Unger, AKA HomeGunsmithUnger
For quite some time now, I have followed HomeGunsmithUnger on Instagram. It’s run by Sebastian Unger, of Austria. He’s a firearms enthusiast who took…
-
Bergara BXR – An “Off the shelf” Custom?
When it comes to precision centerfire rifles, Bergara needs no introduction. But rimfire enthusiasts may not recognize the name, or the Bergara BXR. Introduced…
-
Volquartsen Recoil Rod and Spring Kit for Ruger Mark Pistols
If your Ruger Mark pistol is picky about ammo, you can tune it with this Recoil Rod and Spring Kit from Volquartsen. My three…
-
Wheeler Professional Digital Trigger Gauge
This year alone, I have replaced at least a half dozen triggers. Each time, the manufacturer claimed a lighter pull, along with other improvements.…
-
TandemKross Upriser Chassis Straight Adapter Review
With the release of the Upriser Chassis for the Ruger PC Carbine this year, everyone had an opinion. Magwell funnel? Great! Extended magazine release?…
-
TandemKross Upriser Chassis Straight Stock Adapter Now Available
Fans of the Ruger PC Carbine just got another great upgrade in the TandemKross Upriser Chassis. Last week, they made it available with a…
Independent Firearms & Outdoor Gear Reviews Since 2007
