-
Timney Trigger for the 10/22
Dropping a Timney trigger into one of my 10/22 projects makes a lot of sense. I’ve used a variety of 10/22 triggers already, and…
-
JWH Custom Bolt for the 10/22
In preparation for one of our 10/22 rifle projects, I went searching for a high-quality aftermarket bolt. I found exactly what I was looking…
-
WhistlePig GunBarrel Co’s AccuLite barrel for the Ruger 10/22
As part of our first Project 10/22, I had installed an AccuLite barrel from WhistlePig GunBarrel Co. The goal was to reduce weight while…
-
Quick Fix: Magazine Disconnect on the Ruger MKIV 22/45
As much as I like the Ruger MKIV 22/45 line of pistols, they can definitely use some improvement. I previously covered all the upgrades…
-
From Receiver to Rifle: Range Report and Wrap-up
What a learning experience this has been! I thought I could just buy a Brownells BRN-22 Takedown receiver, add some quality parts, and have…
-
From Receiver to Rifle: Tac-Hammer Barrel
It’s no secret that I really like the Tac-Hammer barrels from Adaptive Tactical. I’ve got one on my Charger Takedown, and it has not…
-
From Receiver to Rifle: PMACA Chassis
For a really custom rifle, I decided to use the Takedown Chassis from PMACA MFG. There are two reasons for this choice. First, I…
-
From Receiver to Rifle: Brownells BRN-22 Takedown Receiver
Late last year, I got this idea to build up a project rifle around a Brownells BRN-22 Takedown receiver, and some spare parts I…
-
Project 10/22: Range Report and Wrap-up
For a rifle that was completed in December, this has taken much longer than it should. A big part of that has to do…
-
Volquartsen Magazine Follower Button Upgrade
Volquartsen’s Magazine Follower Buttons for Ruger pistols are one of my favorite upgrades. They’re inexpensive, easy to install, and can make a noticeable difference…
-
Ultimate Cliploader for Ruger Mark Magazines
If you have a Ruger Mark pistol*, and shoot it often, you need the Ultimate Cliploader. Normally, when I see “Ultimate” in a product…
-
My Wife’s Purple Ruger Mark IV 22/45 Lite
Last month, I shared an article about the TandemKoss modifications I made to my wife’s pistol. It’s a Ruger Mark IV 22/45 Lite, with…
-
TandemKross mods for the Ruger MK IV 22/45
If you want to customize your Ruger MK pistol, TandemKross should be your go-to. They have just about anything you could want to make…
-
Project Updates and Upcoming Reviews
It’s not that I have anything against winter, but it kinda sucks for shooting sports. Trying to fit in some outdoor range time has…
-
Tactical Innovations – Innovative 10/22® Compatible Receivers
If you’ve got the itch to build a custom .22 based on America’s favorite rimfire platform, check out Tactical Innovations (and Pike Arms, which…
-
Ruger Charger + Adaptive Tactical Stock + KAK Mod
Why would anyone mod an Adaptical Tactical TK22 Takedown Stock to fit a KAK Shockwave Blade brace? My first answer is “Why not”? But…
-
Project 10/22: TANDEMKROSS upgrades
At the start of this project, I had mentioned that I would be upgrading some internal components. For convenience and reliability, I like to…
-
Project 10/22: mid-project range report
Our first rimfire project, the Project 10/22, is coming along nicely. It’s got a new stock from Hogue, and a barrel from WhistlePig GunBarrel…
-
Project 10/22: WhistlePig AccuLite barrel and Hogue stock
In the first installment of this project, I had my receiver, but hadn’t yet selected a barrel and stock. At my favorite local store,…
-
Stocking stuffers for Ruger 10/22 lovers from TANDEMKROSS
This holiday season, give the gift of rimfire accessories from TANDEMKROSS. Whether buying for yourself or someone else, they’ve got you covered. Check out…
Independent Firearms & Outdoor Gear Reviews Since 2007
